本公司主要从事建材、矿山、冶金、化工行业的机械设备生产与开发,另外,根据市场需要生产各种环保设备,承接工程设计,特别在细粉磨领域有所成就。


PEX系列颚式破碎机


CPY圆锥破碎机


JKLPCF带双给料辊

单段锤式破碎机


JKPF反击式破碎机


HCP系列环锤式破碎机


XPWX第三代可调式高效细锤破



JKPF反击式破碎机

产品特点:
  简化生产系统,节约建设投资,可破碎高强度,高磨蚀性物料,破碎比大,易损件利用率高,使用寿命长。

产品结构特点:
  板锤由高耐磨合金制造,能破碎高磨蚀性的大块矿石,其形状能翻面和颠倒使用,使其利用率达到36%左右。
  反击板装有可调机构,能够补偿自身的磨损;通过颠倒使用,可以使其寿命延长一倍。
  进料溜板可调节,防止不符合粒度的物料漏出。
  壳体所有与物料接触的部位均有衬板防护,衬板可快速拆装,也具有多方位调换使用的功能。
  承击板和牙板由耐磨合金制成,并具有很大的断面以破碎高磨蚀性物料。
  击碎板的背后装有缓冲和调节机构,当牙板磨损后可及时调节,悬挂系统已获国家专利。

Characteristics:
  Simplify production system
  Save construction investment
  Suitable for high strength and high abrasive material
  High reduction ratio
  Long lifetime
Structure features:
  Blow bar is made of extremely wear-resistant alloys.It can break agglomerate rock of high abrasiveness and can be reused by overturning its side.
The impact arm has an adjustment by which the abrasion itself can be compensated.It's service life can bu prolonged by overturning its side.
  Feed plate os adjustable to prevent the undesirable materials from leaking out.
  The housing are all protected by means of installing liners on the interface with material from wearing.The liners can be mantled or dismantled fleetly.
  The impact armors and the toothed armors are all made of wear-resistant alloys.An adjustment device has been installed on back of the impact plate and it can be adjustde when the toothed armors worn out.
技术参数 Technicaldata